这几句话怎么翻译成英文啊?

冲压螺纹的深浅可以通过调整保压时间来完成，保压时间的输入在手动状态下进行。
Stamping thread depth can be adjusted by pressure holding time, holding pressure time input in manual mode.
· 在半枯凯自动和自动状态下，通过调整接近开关来决定模具上限位的位置。
In the semi automatic and automatic state, to determine the mold cap position by adjusting the proximity switch.
· 在半自动和自动状态下，通过调整光纤姿败链来决定模具下限位的位置。（光纤调整后还要把光纤放大器迹孙调到相应的参数，具体参考附录）
In the semi automatic and automatic state, to determine the lower limit position of the mould by adjusting the fiber. (after adjustment to parameters of fiber, fiber amplifier tuned to the corresponding reference appendix)
译自http://fanyi.baidu.com/#auto/zh/

Stamping thread depth can be adjusted by pressure holding time, holding pressure time input in manual mode.
In the semi automatic and automatic state, to determine the mold cap position by adjusting the proximity switch.
In the semi automatic and automatic state, to determine the lower limit position of the mould by adjusting the fiber.(after adjustment to parameters of fiber, fiber amplifiertuned to the corresponding reference appendix)
丿巅峰睁核丨学术悉纤掘团队竖举为您解答

Stamping the depth of the thread can adj ust the pressure Time to complete, the ho lding time of the input Under the dynamic state. In semi-automatic and automatic st ate, through the adjustable The proximity switch to mold cap of a place Buy. In semi -automatic and automatic state, through t he adjustable The optical fiber to mold th e position of the lower limit position. Adju sted (optical fiber and the fiber amplifier To the corresponding parameters, refer to appendix-+